Exactly How to Remove Acrylic Paint from Wood: 6 DIY Methods

You could be stunned by exactly how typical it is to splash paint over timber, as well as it takes place to everybody. A lot of repaint spots can be quickly gotten rid of.

Removing acrylic paint from your timber is simpler than you believe. Some individuals may be worried concerning taking the paint off as well as harming it. You most likely do not intend to screw up the timber either. Whatever the factor could be, we obtained you covered.

By the time you’re done analysis this short article, obtaining acrylic off timber will certainly be a breeze. Next off, you’ll locate several of one of the most reliable and also most obtainable techniques to adhere to along:

How to Get Acrylic Paint off Wood: Easy 6 Methods

Stripping paint from your timber is remarkably very easy, as well as the important things that we will certainly require are points that the majority of people contend residence.

Here are a couple of approaches you can attempt to remove the acrylic paint on your timber. Be it a table, a door, a furniture, and so on

Method 1: Removing Acrylic from Wood with Soap as well as Rag

strip paint from wood

This is the most basic technique of all. You do not require to throw away at any time or initiative, and also it is halfway decent efficient. Right here’s what you require to make it occur:

Things You Will Need

  • Soap
  • A dustcloth
  • Gloves

As you see, it’s rather uncomplicated. You can collect them without making much of an initiative, squandering cash, or also obtaining out of your residence. Continue complying with the following actions:

Wipe Off the Acrylic

Once you’re all set to begin, wet a dustcloth and also clean the acrylic paint with it.

  1. Dampen a cloth and also use tool stress as you massage it to and fro.
  2. Rotate your cloth around to stop it from obtaining saturated.
  3. Keep in mind that this could not service paint spots that have actually been around for some time.

The entire function is to do away with the additional polymer that’s still fresh.

Clean the Surface

After scrubing the damp dustcloth over the timber, you can continue to cleanse it deeply. Below’s exactly how:

  1. Pour warm water right into a cloth and also utilize some soap.
  2. Use any kind of glycerin soap, it matters not what kind of soap you utilize. As long as it generates adequate soap, you ought to be great.

This option ought to assist you clean up the surface area deep sufficient, so not a solitary pinch of acrylic paint remains behind.

Rub Gently

Do not go hard externally. Be as cautious as you can making use of a harsh dustcloth. If required, use tool stress.

  1. Be mild when scrubing your dustcloth on the continuing to be paint.
  2. Keep scrubing your cloth throughout the surface area. Include extra soap if required till the discolor is totally gone.
  3. Depending on the degree of the paint, you might require numerous dustcloths.

It’s vital to be additional mindful, so do not forget this action.

Keep Wiping

You require to clean the entire surface area for a couple of mins approximately a couple of hrs. This is the only means to do away with the whole acrylic from the timber. Adhere to these actions:

  1. Damp your cloth to obtain any kind of soap deposit off of the timber.
  2. Keep cleaning up until you have actually reduced the effects of the soap.

Follow removing every trace of acrylic.

Let Your Wood Dry

Once you’ve gotten rid of the acrylic, the timber will certainly be all damp. You’ll need to allow it completely dry.

  1. Use a completely dry cloth to get rid of wetness from wet location. Massage the cloth versus the wet surface area till there is no water left.
  2. The timber may still perspire, so allow it completely dry for 48 hrs.
  3. Depending on exactly how large your timber is, this procedure can take basically time.

Once the timber runs out entirely, after that you’ve effectively gotten rid of acrylic from it making use of a dustcloth and also soap.

Method 2: Removing Acrylic with Olive Oil

clean acrylic paint from wood surface

If the very first technique does not work for you, do not fret. We obtained a lot more strategies that can aid you get rid of that irritating paint from your timber. This is a wonderful option, as well as it’s additionally an all-natural item. Allow’s go in advance and also offer it a shot.

Things You Will Need

It’s everything about scuffing, so you’ll require–

  • Paint scrape
  • Putty blade (optional)
  • Rag
  • Olive oil

These products are very easy to locate in the house, so you need to not have any type of issue collecting them.

Soften the Paint

Using olive oil, you will certainly need to soften up the paint. This should not be much of a trouble; you simply require to adhere to these actions:

  1. Pour some olive oil on the dustcloth. Massage the cloth with the oil around the timber surface area.
  2. Spread the oil everywhere you discover acrylic paint.

This ought to begin softening up the surface area.

Let It Sit

You will certainly need to allow the olive oil rest on the acrylic paint for a minimum of 15 mins. This ought to obtain deep right into the paint as well as obtain it off the timber.

  1. Do not touch the surface area while the oil gets the job done.
  2. If you can allow it rest for 30 mins or even more than that, it would certainly be also much better.

You will certainly see exactly how the acrylic paint begins softening up.

Scrape the Paint

Once the paint has actually entirely softened, you can scratch it off. Right here, make use of the paint scrape or putty blade according to your choice.

  1. Start gently pressing the blade and also scratching the surface area off the paint.
  2. Try not to harm the timber. Get rid of all the acrylic paint you can.

After 30 mins to 1 hr, you need to have totally got rid of the paint making use of olive oil as a conditioner. Utilize any kind of device you really feel comfy with.

Method 3: Removing Acrylic Paint from Wood Using Alcohol

Alcohol is an additional superb item you can make use of to remove acrylic paint. Right here, we’ll describe just how it functions:

Things You’ll Need

  • Alcohol
  • Putty blade
  • Old dustcloth
  • Fresh cloth

Pour Alcohol on a Rag

Here, you require to put alcohol on the dustcloth so you can begin cleaning the surface area with the paint.

  1. Get any type of standard massaging alcohol. If required, most likely to a pharmacy and also obtain one.
  2. Grab a dustcloth and also cover the container. Currently tremble it as tough as you can up until you see the dustcloth is a little damped.

This will certainly offer you the thumbs-up to begin scratching it off.

Scrape the Paint

Here, you will certainly need to eliminate the acrylic paint with a putty blade:

  1. Try to chip off the leading layer as long as feasible. Take care when doing so as you could harm the timber as well as leave some marks.

The even more layers you get rid of, the simpler it will certainly be for the alcohol to puncture.

Rub the Paint Off

This is one of the most important action, so wage treatment yet likewise properly. Right here’s just how:

  1. Start by massaging it backward and forward externally up until the paint is divided from the timber.
  2. Keep including as much alcohol as required to the towel. Do not moist the entire item, yet see to it is adequately wet.
  3. Please beware when utilizing alcohol as it might harm your timber. Do not be as well rough when scrubing the paint off.

Remember, this is to soften up the paint so you can later on eliminate the extra.

Wipe the Alcohol Away

Remove any kind of added indicator of acrylic paint left. This ought to be rather very easy.

  1. Get a tidy and also fresh dustcloth and also put some water on it.
  2. Rub the dustcloth backward and forward on the wet surface area till there is no dampness.
  3. This may occupy to 24 hrs up until the timber is totally dry.
  4. Wipe the location to get rid of the alcohol deposit.

Leave the wood surface area as immaculate as feasible. Currently, you’ve effectively gotten rid of the acrylic paint.

Method 4: Remove Acrylic Paint from Wood Using a Heat Gun

will acrylic paint wash off

A warmth weapon is additionally efficient at eliminating acrylic paint also if it does not appear like so. Right here we’ll inform you just how that’s feasible:

Items You’ll Need

  1. Heat weapon
  2. A putty blade
  3. A cloth or item of fabric
  4. Sandpaper (optional)

Find Out If the Painted Area Is Large Enough

It’s up to you whether you intend to get rid of discomfort tarnish from your door or any kind of various other sort of timber. In any case, it’s worth a shot.

  • If you’re really going to obtain a warmth weapon, they are affordable and also can be discovered at the majority of craft shops.

Take Care

Keep in mind that a warm weapon is not the like a strike clothes dryer, it has a little bit a lot more horse power, so you need to beware with it.

We extremely suggest checking out the guidelines prior to you begin removing your paint making use of the warmth weapon. We additionally advise putting on safety equipment such as shatterproof glass as well as a mask.

Now keep in mind that a warm weapon resembles ironing, you desire it to be functional as well as not hold it for also lengthy in a solitary location due to the fact that the warm will certainly relax the paint as well as it might scuff everything off.

It might not be quick, yet this an extremely effective method to strip paint as long as you take care when doing so.

Heat Up the Paint

Use the warm weapon straight on the timber surface area. Make certain to cover the whole location where the acrylic paint is.

  1. Hold the device with one hand, maintaining the air flow ports discovered.
  2. Before trying to remove the paint, allow the warmth weapon fume sufficient initially, provide a couple of mins prior to utilizing it.
  3. You may intend to examine the temperature level initially for the timber where it will not be seen.
  4. Hold it 4 inches far from the discolor to avoid damages to the timber for around 10 to 20 secs.
  5. Don’t hold it in one area for long as it might harm your timber.

After warming up the entire surface area, you’re nearly all set to begin obtaining the paint off.

Scrape It Off

While the acrylic paint begins to warm up, you can start to scuff it. Continue by doing this:

  1. Hold the warmth weapon with one hand and afterwards attempt to obtain beneath the paint tarnish making use of the side of your blade.
  2. Position the nozzle simply in advance of the putty blade.
  3. Don’t attempt to eliminate substantial swathes of paint at as soon as, go for the very easy strips.
  4. At this factor, the paint tarnish must start ahead off.
  5. Don’t allow excessive crud accumulate on your putty blade.
  6. Turn off the warmth weapon whenever you require to cleanse your putty blade.
  7. Keep in mind that paint tarnish does not constantly come off as simple, so hold your horses as well as take as much time as required.
  8. Switch off the warm weapon as well as allow it cool for at the very least 30 mins prior to keeping it.

Presently, you need to have the entire surface area without any type of acrylic paint. It’s time to clean up the deposits.

Wipe the Surface

Once you’re at this component of this procedure, there are a number of various manner ins which you can obtain the deposit off:

  1. Wait up until the timber isn’t warm any longer, utilize a wet cloth as well as massage it to and fro to get rid of any kind of continuing to be deposit.
  2. If you’re mosting likely to sand it, allow it completely dry for a minimum of 24 hrs, due to the fact that if you do not, your sandpaper is going to obtain congested with deposit.

Wiping the surface area will certainly clean up the deposits and also any type of continuing to be acrylic paint. Attempt to allow it rest pristinely as well as prepared for any type of sanding or discoloration you wish to do later on.

Method 5: Remove Acrylic Paint from Wood by Sanding

how do you get acrylic paint off of wood

This is most likely one of the most demanding technique in the listing, yet it is likewise beneficial. With sandpaper as well as a fining sand block, this can take a great deal of time. If you make use of a fining sand maker, after that you can lower the moment as well as initiative tremendously. Below’s what to do:

Things You’ll Need

  • Sandpaper 150- grit as well as 80- grit
  • Sanding block
  • Sanding equipment (optional)
  • Water
  • An item of towel or dustcloth

As you see, you do not require a lot for this technique either.

Sand the Surface

There’s no time at all to waste, you can proceed with the fining sand right now.

  1. Make certain to use a safety mask as well as shatterproof glass prior to fining sand.
  2. Wrap the sandpaper around the fining sand block.
  3. Rub the sandpaper backward and forward with also stress.
  4. If you intend to sand a rounded surface area, you can make use of a dowel.
  5. Brush the collected dirt.

After you end up fining sand, the timber ought to be really smooth to the touch.

Clean the Wood

Cleaning the timber will certainly allow it look nicely once more.

  1. Rub a damp dustcloth over the timber to clean away any type of deposit.
  2. If it obstructs, revolve the dustcloth around or rewet it and also proceed cleaning towards the grain.
  3. Keep cleaning up until the dustcloth turns up tidy. That’s the very best method to inform if you’re done.

Once you’ve cleansed it up, after that you’re prepared to do any kind of refurbishing if essential.

Refinish the Wood

If you intend to utilize the item of timber for any kind of objective later on, we suggest redecorating. This is exactly how:

  1. Once it’s completely dry, obtain a brush and also retouch the timber utilizing the exact same tarnish that was made use of prior to.
  2. Wet the bristles concerning midway up and afterwards carefully put the brush on the side of the container.
  3. Make certain to use the coating in straight as well as also strokes relocating the instructions of the grain.
  4. Avoid over-brushing; as quickly as the surface area looks excellent, you must quit.

Refinishing the timber will certainly aid you provide its shade and also level of smoothness back. You will not need to collaborate with a harsh item ultimately.

Method 6: Stripping Acrylic Paint Using a Solvent

The most efficient means to do away with acrylic paint is to remove it away with a solvent. While this is one of the most efficient technique, it’s additionally one of the most harmful.

Here’s exactly how it functions:

Choose a Solvent

This might not be a simple topic, today that we enjoy chemicals, we have actually made a decision that it would certainly best if we utilized methylene chloride. This is an incredibly powerful chemical as well as ought to be made use of with treatment.

Now, this chemical is based upon citrus and also is much more eco-friendly, however it is still an unsafe chemical, so do not mess about with it. You can discover it at many repaint shops.

You might still discover some choices like acrylic paint eliminators as well as points like that. Still, this is the ideal alternative you’ll discover.

Gather the Items

  • Solvent (as described)
  • Paintbrush or paint roller
  • Putty blade
  • Piece of fabric or dustcloth

This must suffice to begin removing the paint with the solvent.

Follow Safety Measures

Following precaution will certainly assist you remain damage-free when collaborating with solvents. The fumes and also various other bits coming off the acrylic paint can be greatly destructive.

  1. Wear lengthy sleeves as the item might spray
  2. Heavy handwear covers
  3. Safety safety glasses or glasses
  4. For defense from harmful vapors: An air flow mask

Once you’re done preparing security devices, after that you’re nearly all set to begin.

Ensure Proper Ventilation

But initially, see to it to operate in a halfway decent aerated location. Below’s a means to make that take place:

  1. Allow air to relocate right into and also away from the house normally.
  2. If feasible job outside, or else open all the doors and also home windows.
  3. You can likewise establish a follower for the fumes so the air movement strikes them away.

Don’t fail to remember to be cautious when attempting to tidy acrylic paint from your timber surface area; take a. couple of breaks in-between when doing so as it may be tiring the very first time around.

Spread the Solvent

You’ll require to spread out the solvent on the timber surface area, so it begins doing its impact. Right here’s just how:

  1. Use the paint roller or paintbrush and also see to it you have the ideal one for the work.
  2. Pour the paint right into the roller tray. Or simply dip the paintbrush in the solvent.
  3. Spread the solvent around the timber surface area with the acrylic paint.
  4. Then wait 20 minutes. The paint will certainly begin to bubble.

Be added mindful not to put any one of the solvents out of the timber surface area. This solvent is very hazardous as well as can be harming to pets, individuals, and also floorings.

Scrape Off the Paint

After putting the solvent as well as allow it function, you’ll see exactly how the paint begins to bubble out. As soon as this takes place, you can begin scuffing it off.

  1. Use a putty blade to scratch the paint bubbles off the timber.
  2. Apply tool stress as you massage backward and forward.
  3. Be cautious when removing paint bubbles as you can harm the timber, and also we do not desire that.

Make certain to eliminate every trace of acrylic paint.

Clean Up

Finish by cleaning up the timber, so there’s no trace of acrylic paint, and also at the exact same time, no solvent to fret about.

  1. Pour water on a cloth as well as begin cleaning up until the timber is reduced the effects of.
  2. Avoid making use of the exact same cloth in your home. As it lugs deposits of the previous surface area, it will certainly spreads them to the surface area it touches. It is much better to toss it away.

If you do away with all the acrylic paint as well as deposits, after that you’re virtually done.

Let It Dry

Before you use any kind of waxes or spots, you ought to provide your timber a minimum of a week to completely dry totally.


Now that you’ve obtained this much, see just how very easy it is to eliminate acrylic paint from timber? It does take a little of initiative as well as time, today your timber is tidy and also fresh.

You likewise discovered just how to eliminate paint from your timber, so currently you can also eliminate your next-door neighbor’s paint tarnish as well as make some cash. At the end of the day, it’s a win-win.

Related Articles:

  1. What Types of Paints can be Used for Mirror Frame?
  2. What are the Recommended Paints for Your Wood?
  3. Recommended Paints for Hiding Defects in Your Wood
  4. What are the Recommended Paints for Your Old Wood?
  5. How to Give a Clear Coat on White Paint?